Kako To Use And Store ITO Vodljivo staklo

Kako koristiti i trgovina ITO Vodljivo staklo

ITO vodljivo staklo is a specijal materijal s vodljiva svojstva to je uobičajeno korišteno in elektroničko i optičko primjene. To ensure the optimal performanse ITO vodljivo staklo, it važno to ručka i trgovina it ispravno. ovdje are some tips on how to use and store ITO vodljivo staklo:

When uzimanje i stavljanje dolje ITO vodljivo staklo, it treba samo be dodirnuto on its four sides, avoiding contact with its conductive ITO surface. This minimizes the risk of scratches or damage to its conductive layer.

Handle ITO vodljivo staklo sa njegom, izbjegavanje sudari s s ostali čvorišta i strojevi, as this may cause damage to the glass and afekt performanse.

When storage ITO conductive glass for long periods, attention should be paid to moisture, as overive moisture can afekt its resistance and transmidance. It's best to store ITO vodljivo staklo a a suho okolina, tak as a desiccator or a brtvljeno kontejner s agens.

Čišćenje ITO vodljivo staklo:

Tijekom proizvodnja, ambalaža, i transportacija, ITO vodljivo staklo svibanj become kontaminirano by nečistoće like Dust or grease. Before using ITO vodljivo staklo, it's essential to clean it properly. There are many cleaning available, but the most common method is ultrasonic cleaning with organic otapala.

When cleaning grease from the the glass surface, it is netopljiv in water and requires an organic solvent such as toluen, acetone, or etanol. Toluene has the strongest demasiv ability among these otapala, so it is tipično used first. Međutim, toluene remains on the glass surface after cleaning, and it is topiv in acetone, which allows for further cleaning. Acetone will also remain on the glass surface, and it is topljiv in etanol. Konačno, etanol is topljiv in voda, allowing for the removal of residual etanol. The čišćenje narudžba is as follows: toluene (10-20 minutes) → acetone (10-20 minutes) → etanol (10-20 minutes) → deionized water (20-30 minutes).

Nakon čišćenja, ITO vodljivo staklo treba biti konzervirano in bezvodno alkohol, which ensures that the glass is potpuno suho i free of nečistoće. It can then be stored for long periods of time and out for use when need. By following these guidelines, the cleaning and storage of ITO conductive glass can be done effective, ensure its its optimal performance and longevity.